What is a Roadworthy Certificate- All States and Territories Australia

Roadworthy Certificate

Generally, a Certificate of Roadworthiness is necessary to sell or re-register a vehicle. As a result, fewer automobiles with inadequate maintenance on the road. A Certificate of Roadworthiness (also known as a “roadworthy certificate”) may be necessary for specific situations to remove a Vehicle Defects Notice or a Notice of Unroadworthiness.

A Roadworthy Certificate serves as an essential safeguard for buyers and sellers when it comes to protecting the general public from unsafe automobiles on Australian roads. It’s an examination of the car to ensure that nothing has worn out or degraded to use it on the road. All States and Territories Australia inspection covers only the major safety-related items:

  • Wheels and tires
  • Steering, suspension, and braking systems
  • Seats and seatbelts
  • Lamps and reflectors
  • Windscreen, and windows including front windscreen wiper and washers
  • The structure of the vehicle itself
  • Other safety-related items on the body, chassis, or engine.

The roadworthiness test does not examine the vehicle’s mechanical integrity or overall condition. If you want an impartial assessment from the RACV or VACC on the general condition and reliability of the car, you should get one of them. It is only possible to issue a Certificate of Roadworthiness from a qualified vehicle tester working from a designated service station or garage.

What Is Inspected in a Roadworthy Test?

The inspector will examine both the outside and interior of the vehicle, paying specific attention to areas that are not readily apparent, such as the brake.

Interior Parts Inspected

The Engine Oil

It is common for car inspectors to verify the engine oil’s condition and record previous oil changes. If the automobile uses the correct engine oil, the correct amount of the correct oil, and the oil is changed on time; they’ll want to know about it.

The Brakes

You can’t leave out the brakes if you’re going to do an inspection. The worn-out brake pads and drums need to be replaced and refilled the brake fluid. Have the brakes examined for leakage if your brake fluid is frequently refilled? Brakes that don’t perform when engaged should be looked for.

The Suspensions

The inspection team will make sure that the vehicle has the necessary suspensions and that there are no apparent signs of damage or abnormalities in the suspensions. Consult the owner’s handbook for information on properly maintaining the suspensions.

The Steering

When it comes to the steering, you want to be sure you’re using the proper fluid and maintaining the correct volume. Before bringing your vehicle in for an inspection, please make an appointment with an authorised auto-steering specialist to have them look at it.

The Speed Governor

Depending on the make and model of the vehicle, speed governors are necessary to keep the vehicle at a safe place. Make sure that the necessary speed governor is installed and working if you own a vehicle like this one. If your automobile is expected to have a speed governor, the car safety inspectors will not leave it out.

Gas Inspection

Annual gas inspection for cars fuelled by natural gas or propane is required by law in all-state and territories Australia. As a precaution, inspectors will look for signs of gas leaks and expiration dates on gas storage containers.

Seat Belts

Make sure your car seats are properly secured with functional seatbelts! Always make sure that your vehicle has the correct number and quality of seats, with working seatbelts.


The vehicle’s horn will also be tested, despite its seeming banality. All vehicles in Australia must have at least one horn or any other device capable of giving a hoot/audible warning to other road users under Reg 34 of the Australian Vehicle Standard Rules.

Outer Parts Inspected:


It is the responsibility of governments to guarantee that tires supplied inside their borders are appropriate for the conditions of the local roadways. It is why all foreign automobile tire manufacturers designate their tires with codes to signify the country in which their product has been tested and authorised. Only purchase tires that Australian authorities have approved.

tires wear out over time. tires that have lost their traction are more susceptible to skidding and swerving. It’s also important to keep an eye on your tires’ condition and verify if you have the proper ones. Treadwear indicators on tires are check bars that show how much the tire has been worn out.

The inspectors will also check if the car tires:

 Deep Cut

No deep cut Wheel misalignment or suspension issues may be to blame for a vehicle’s uneven wear

Tread Patterns are Original

Tread patterns are original and haven’t been re-grooved; tires are balanced and in good shape; the rims are not bent, fractured, or damaged.

Correct Tire Pressure

Keeping the tire pressure at the manufacturer’s suggested level is important. Check the condition of your tires and, if required, replace them with new ones before submitting your vehicle for a roadworthy certificate examination.


The windshield of a car must be kept clear and clean for the driver to see clearly. If you want your windscreen to pass inspection, it must meet the following requirements.

 Have No Damage or Crack

A bullseye, star fracture, or crack in the windshield impairs the driver’s visibility. have no damage or crack. Before taking the car in for an inspection, a professional should repair or replace the windscreen.

Windscreen wipers suited for the vehicle must be in working order when the vehicle is parked. The rubber on the wiper’s blade should be in good shape. Ensure that all windscreen washers are present and working properly, including windscreen demisters, defoggers, and defrosters, if necessary.

Side Mirrors & Rearview Mirror

A clean, clear, adjustable, and undamaged set of side and rearview mirrors is a must while preparing to have your vehicle inspected.


There should be no problems with the headlights, taillights, indicators, reverse, or danger lights. When the brakes are applied, the braking lights should illuminate instantly, and the high-beam lights should be dimmable.

 Life Saver, First Aid Box & Fire Extinguisher

All vehicles should be equipped with a Life Saver, a stocked first aid kit, and a fire extinguisher.

Overall Condition of Your Vehicle

The general condition of your car, including its body and paintwork, was a factor in the final score. Ensure that your vehicle’s body is free of dings, cracks, and damaged components and is properly painted.


Maintaining a vehicle in good condition and ensuring that its components are working is essential to obtaining a safety certification. It is important to fix any broken or worn-out parts and replace those that cannot repair. Your car should be able to pass inspection with this detailed checklist.

When Should You Use One?

Proof that a registered vehicle has been thoroughly inspected for safety and is suitable for use on public roads is provided by a roadworthy certificate. All state and territories Australia require roadworthy certifications, and there are several reasons for this, including:

Registration Renewal

Before registration, your car will most certainly require a roadworthy certificate if it is older than five years. A roadworthy certificate is also required if you’re renewing the registration of an unregistered car.

Selling a Car

The sale of a vehicle Transferring ownership of a car necessitates obtaining a roadworthy certification first. As a result, you’ll need one if you want to sell a car or even transfer ownership within your own family.

Get Your Car Removed Right Away!

Get an instant free quote by contacting us and letting us remove your unroadworthy car away from your premises. You don’t have to go through any lengthy car selling process. Simply contact Adrians Metal Recyclers. We are a licensed and professional Cars Wreckers Gold Coast Company that makes the whole process to get Top Cash for cars easier and quicker!

call now cash for cars